The motorcycle chain is an important part of the motorcycle drivetrain. 

It connects the motorcycle sprocket to the rear wheel, transferring power from the engine to the wheels. 

Over time, motorcycle chains will stretch and wear out, requiring replacement. 

In this article, we’ll show you how to replace a motorcycle chain. 

We’ll walk you through the steps of removing the old chain, installing the new chain, and adjusting it for proper tension. 

With a little time and effort, you can do this job yourself and save money on labor costs.

1. Remove the old motorcycle chain. Use a chain break tool to remove the master link, or break the chain at a pin. If you are breaking the chain at a pin, use a punch to drive the pin out from the inside of the link. Repeat this process for the other side of the chain.
2. Clean the motorcycle sprockets with a rag and some motorcycle degreaser. This will help ensure that the new chain will have a good grip on the sprockets.
3. Install the new motorcycle chain. Start by threading one end of the chain through the rear sprocket. Then, thread the other end of the chain through the front sprocket. Bring the two ends of the chain together and connect them with the master link, or install a new pin if you are breaking the chain at a pin.
4. Adjust the motorcycle chain tension. The chain should have some slack, but it should not be loose enough to sag down into the tire. Use a ruler or tape measure to check the chain slack. If necessary, adjust the motorcycle rear axle to add or remove slack from the chain.
5. Test ride the motorcycle to check that the new chain is working properly. Check the chain tension again after riding to ensure that it has not become too loose.

Congratulations! You’ve successfully replaced your motorcycle chain. With regular maintenance and care, your new chain should last for

If you don’t feel confident replacing your motorcycle chain yourself, there are a few options for getting it done. 

You can take your motorcycle to a motorcycle dealership or repair shop and have them do the job for you. 

This is usually the most expensive option, but it will ensure that the job is done correctly. 

You can also take your motorcycle to a local motorcycle mechanic. 

This is often a less expensive option, but it’s important to find a reputable mechanic who has experience working on motorcycles. 

Finally, you can search online for motorcycle chain replacement services.

When shopping for a new motorcycle chain, there are a few things to keep in mind. 

First, you’ll need to know the pitch of your motorcycle chain. 

The pitch is the distance between pins on the chain, and it’s typically either 420 or 428. You’ll also need to know the length of your motorcycle chain. 

The length is measured from the center of the front sprocket to the center of the rear sprocket, and it’s typically listed in inches. 

Finally, you’ll need to choose a motorcycle chain with the proper link count for your motorcycle. 

The link count is the number of links in the motorcycle chain, and it should match the number of teeth on your motorcycle sprockets.

The cost of replacing a motorcycle chain will vary depending on the motorcycle, the type of chain, and the labor costs. 

However, you can expect to pay anywhere from $50 to $200 for the parts and labor.

The average salary for a small engine mechanic is $36,610 per year. 

Salaries typically range from $25,180 to $51,700 per year. 

Experience and certifications can affect earnings.

It’s generally recommended that you replace your motorcycle chain every 3,000 to 5,000 miles. 

However, this will vary depending on how often you ride your motorcycle and how well you maintain it. 

If you notice any excessive wear on your motorcycle chain, or if it starts to make noise, it’s best to replace it as soon as possible.

Here are a few tips for maintaining your motorcycle chain:

With regular maintenance and care, your motorcycle chain will last for many miles. 

By following these tips, you can ensure that your motorcycle chain stays in good condition and continues to work properly.